From Wikipedia, the free encyclopedia
Color Computer 2 (1983–1986)
During the CoCo 1 production run, much of the discrete support circuitry had been re-engineered into a handful of custom integrated circuits, leaving much of the circuit board area of the CoCo 1 as empty space. To cut production costs, the case was shortened by about 25% and a new, smaller power supply and motherboard were designed. The “melted” keyboard from the white CoCo 1 and the TDP-100 style ventilation slots were carried over. Aside from the new look and the deletion of the 12 volt power supply to the expansion connector, the computer was essentially 100% compatible with the previous generation. The deletion of the 12 volt power supply crippled some peripherals such as the original floppy disk controller, which then needed to be upgraded, installed in a Multi-Pak interface, or supplied with external power.
Production was also partially moved to Korea during the CoCo 2’s life-span, and many owners of the Korean-built systems referred to them as “KoKos”. Production in the USA and Korea happened in parallel using the same part numbers; very few, if any, differences exist between the USA built and Korean built CoCo 2 machines.
Upgraded BASIC ROMs were also produced, adding a few minor features and correcting some bugs. A redesigned 5-volt disk controller was introduced with its own new Disk BASIC ROM (v1.1). This controller added the “DOS” command which was used to boot the OS-9 operating system by Microware.
Later in the production run, the “melted” keyboard was replaced with a new, full-travel, typewriter-style keyboard.
The final significant change in the life of the CoCo 2 was made for the models 26-3134B, 26-3136B, and 26-3127B (16K standard, 16K extended, and 64K extended respectively). Internally this model was redesigned to use the enhanced VDG, the MC6847T1. This enhanced VDG allowed the use of lower case characters and the ability to change the text screen border color. However, for compatibility reasons neither of these features were used and are not enabled in BASIC. Midway during the production run of these final CoCo 2s, the nameplate was changed from “Radio Shack TRS-80 Color Computer 2” to “Tandy Color Computer 2”. The red, green, and blue shapes were replaced with red, green, and blue parallelograms.